Workflow orchestration

Cloud

Server v4.x

Server v3.x

Workflows in CircleCI are used to orchestrate jobs. Workflows have options to control run order, scheduling, and access to resources. This page explains how to configure workflows to suit your project. Optimizing your workflows can increase the speed of your software development through faster feedback, shorter reruns, and more efficient use of resources.

Overview

A workflow is a set of rules for defining a collection of jobs and their run order. Create workflows to orchestrate your jobs using the options described on this page.

With workflows, you can:

Run and troubleshoot jobs independently with real-time status feedback.
Schedule workflows for jobs that should only run periodically.
Fan-out to run multiple jobs concurrently for efficient version testing.
Fan-in to deploy to multiple platforms.
Catch failures in real-time and rerun only failed jobs.

Workflows configuration examples

For a full specification of the workflows key, see the Workflows section of the configuration reference.

Concurrent job execution

The example in this section shows the default workflow orchestration model of concurrent jobs. Concurrent jobs are defined as follows:

Use the workflows key.
Name the workflow, in this case, build_and_test.
Nest the jobs key with a list of job names that are defined in the configuration file. In this example the jobs have no dependencies defined, so they run concurrently.

Using Docker? Authenticating Docker pulls from image registries is recommended when using the Docker execution environment. Authenticated pulls allow access to private Docker images, and may also grant higher rate limits, depending on your registry provider. For further information see Using Docker authenticated pulls.

jobs:
  build:
    docker:
      - image: cimg/base:2023.06
    steps:
      - checkout
      - run: <command>
  test:
    docker:
      - image: cimg/base:2023.06
    steps:
      - checkout
      - run: <command>
workflows:
  build_and_test:
    jobs:
      - build
      - test

See the Sample concurrent workflow config for a full example.

When using workflows, note the following best practices:

Move the quickest jobs up to the start of your workflow. For example, lint or syntax checking should happen before longer-running, more computationally expensive jobs.
Using a "setup" job at the start of a workflow can be helpful to do some preflight checks and populate a workspace for all the following jobs.

Refer to the Optimization reference for tips to improve your configuration.

Sequential job execution

This example shows a workflow with four sequential jobs. Each job waits to start until the "required" job finishes successfully, as illustrated in the following diagram:

This configuration snippet is an example of a workflow configured for sequential jobs:

workflows:
  build-test-and-deploy:
    jobs:
      - build
      - test1:
          requires:
            - build
      - test2:
          requires:
            - test1
      - deploy:
          requires:
            - test2

Define job dependencies using the requires key. A job must wait until all upstream jobs in the dependency graph have run. In this example, the deploy job runs when the build, test1 and test2 jobs complete successfully:

The deploy job waits for the test2 job
The test2 job waits for the test1 job
The test1 job waits for the build job

See the Sample Sequential Workflow config for a full example.

Fan-out/fan-in workflow

This example workflow has a fan-out/fan-in structure, as follows:

A common build job is run.
The workflow fans-out to run a set of acceptance test jobs concurrently.
The workflow fans-in to run a common deploy job.

This configuration snippet is an example of a workflow configured for fan-out/fan-in job execution:

workflows:
  build_accept_deploy:
    jobs:
      - build
      - acceptance_test_1:
          requires:
            - build
      - acceptance_test_2:
          requires:
            - build
      - acceptance_test_3:
          requires:
            - build
      - acceptance_test_4:
          requires:
            - build
      - deploy:
          requires:
            - acceptance_test_1
            - acceptance_test_2
            - acceptance_test_3
            - acceptance_test_4

In this example, as soon as the build job finishes successfully, all four acceptance test jobs start. The deploy job waits for all four acceptance test jobs to succeed before it starts.

See the Sample Fan-in/Fan-out Workflow config for a full example.

Hold a workflow for a manual approval

Use an approval job to configure a workflow to wait for manual approval before continuing. Anyone who has push access to the repository can approve the job to continue the workflow. Approve either by using the Approve button in the CircleCI web app, or via the API.

Some things to keep in mind when using manual approval in a workflow:

approval is a special job type that is configured when listing jobs under the workflows key. You do not need to define an approval type job in the jobs section of your configuration. If you do configure steps for a job that is given the approval type in the workflows section, the steps for that job will not be run. An approval job is only used to hold the workflow for approval, not to run any work.
The approval job name must be unique and not used by any other job in your configuration.
The name of the approval job is arbitrary. For example, an approval job can be named hold, wait, pause, etc.
All jobs that run after a manual approval job must require the name of the approval job.
Jobs run in the order defined in the workflow. When the workflow encounters a job with type: approval, the workflow pauses until approval is granted. Once approval is granted the workflow continues to process jobs in the order defined in the configuration file.
Jobs downstream of an approval job can be restricted by adding a restricted context to those downstream jobs.

The following screenshot demonstrates:

A workflow that needs approval.
The approval popup.
The workflow map after approval.

A three section image showing workflow map with "Needs approval" job

By clicking on the approval job’s name (hold, in the screenshot above), an approval dialog box appears. You can approve or close the popup without approving.

Configure an approval job

To set up a manual approval workflow, add a job to the jobs list in your workflow with type: approval. For example:

# ...
# << your config for the build, test1, test2, and deploy jobs >>
# ...

workflows:
  build-test-and-approval-deploy:
    jobs:
      - build  # your custom job from your config, that builds your code
      - test1: # your custom job; runs test suite 1
          requires: # test1 will not run until the `build` job is completed.
            - build
      - test2: # another custom job; runs test suite 2,
          requires: # test2 is dependent on the success of job `test1`
            - test1
      - hold: # <<< A job that will require manual approval in the CircleCI web application.
          type: approval # This key-value pair will set your workflow to a status of "Needs Approval"
          requires: # We only run the "hold" job when test2 has succeeded
           - test2
      # On approval of the `hold` job, any successive job that requires the `hold` job will run.
      # In this case, a user is manually triggering the deploy job.
      - deploy:
          requires:
            - hold

In this example, the deploy job will not run until the hold job is approved.

Approve a job

To approve a job follow these steps:

In this example, the purpose of the hold job is to wait for approval to begin deployment. A job can be approved for up to 90 days after it starts.

Scheduling a workflow

The deprecation of the scheduled workflows feature is postponed. Since the deprecation announcement went live, your feedback and feature requests have been monitored and it is clear there is more work for us to do to improve the existing scheduled pipelines experience, and also make migration easier for all. Updates on a new deprecation timeline will be announced here and on CircleCI Discuss.

By default, a workflow runs on every git push. To trigger a workflow on a schedule, add the triggers key to the workflow and specify a schedule. Scheduled workflows use the cron syntax to represent Coordinated Universal Time (UTC).

Running a workflow for every commit for every branch can be inefficient and expensive. Scheduling a workflow is an alternative to building on every commit. You can schedule a workflow to run at a certain time for a specific branch or branches. Consider scheduling workflows that are resource-intensive or that generate reports on a schedule rather than on every commit.

A scheduled workflow will run on a schedule only. A scheduled workflow will not be run on commits to your code.

If you do not configure any workflows in your .circleci/config.yml, an implicit workflow is used. If you configure a scheduled workflow the implicit workflow is no longer run. If you want to build on every commit you must add your workflow to your configuration file.

When you schedule a workflow, the workflow will be counted as an individual user seat.

Build every night

In the example below, the nightly workflow is configured to run every day at 12:00am UTC. The cron key is specified using POSIX crontab syntax. See the crontab man page for cron syntax basics. The workflow runs on the main and beta branches.

Scheduled workflows may be delayed by up to 15 minutes. This delay is to maintain reliability during busy times, such as 12:00am UTC. Do not assume that scheduled workflows start with to-the-minute accuracy.

workflows:
  commit:
    jobs:
      - test
      - deploy
  nightly:
    triggers:
      - schedule:
          cron: "0 0 * * *"
          filters:
            branches:
              only:
                - main
                - /^release\/.*/
    jobs:
      - coverage

In the above example:

The commit workflow has no triggers key and runs on every git push.
The nightly workflow has a triggers key and runs on the specified schedule, which is daily, and only runs on the main branch, as well as any branch that starts release/.

Specifying a valid schedule

A valid schedule requires:

A cron key
A filters key
The branches filter must be present

The value of the cron key must be a valid crontab entry.

The following are not supported:

Cron step syntax (for example, */1, */20).
Range elements within comma-separated lists of elements.
Range elements for days (for example, Tue-Sat).

Use comma-separated digits instead.

Example invalid cron range syntax:

    triggers:
      - schedule:
          cron: "5 4 * * 1,3-5,6" # < the range separator with `-` is invalid
          filters:
            branches:
              only:
                - main

Example valid cron range syntax:

    triggers:
      - schedule:
          cron: "5 4 * * 1,3,4,5,6"
          filters:
            branches:
              only:
                - main

The value of the filters key must be a map that defines rules for execution on specific branches.

For more details, see the branches section of the CircleCI configuration reference.

For a full configuration example, see the Sample Scheduled Workflows configuration.

In a workflow, you can use a context to securely provide environment variables to specific jobs. Contexts allow you to define environment variables at the organization level and control access to them through security restrictions. Using contexts, sensitive data like API keys or credentials are securely shared with only the jobs that require them. Sensitive data in contexts will not be exposed in your config file.

The following example shows a workflow with four sequential jobs that each use a context to access environment variables. See the Contexts page for detailed instructions on this setting in the application.

The following config.yml snippet is an example of a sequential job workflow configured to use the environment variables defined in the org-global context:

workflows:
  build-test-and-deploy:
    jobs:
      - build
      - test1:
          requires:
            - build
          context: org-global
      - test2:
          requires:
            - test1
          context: org-global
      - deploy:
          requires:
            - test2

The test1 and test2 jobs have access to environment variables stored in the org-global context if the pipeline meets the restrictions set for the context, for example:

Was the pipeline triggered by a user who has access (is in the relevant org/security group etc.)?
Does the project have access to the context? By default all projects in an organization have access to contexts set for that organization, but restrictions on project access can be configured.
Does the pipeline meet the requirements of any expression restrictions set up for the context?

Use conditional logic in workflows

You may use a when clause (the inverse clause unless is also supported) under a workflow declaration with a [logic-statements] to determine whether or not to run that workflow.

The example configuration below uses a pipeline parameter, run_integration_tests to drive the integration_tests workflow.

version: 2.1

parameters:
  run_integration_tests:
    type: boolean
    default: false

workflows:
  integration_tests:
    when: << pipeline.parameters.run_integration_tests >>
    jobs:
      - mytestjob

jobs:

This example prevents the workflow integration_tests from running unless the run_integration_tests pipeline parameter is true. For example, when the pipeline is triggered with the following in the POST body:

{
    "parameters": {
        "run_integration_tests": true
    }
}

Using filters in your workflows

The following sections provide examples for using filters in your workflows to manage job execution.

You can filter workflows by branch, git tag, or neither. Workflow filters for branches and tags have the keys only and ignore:

Any branches/tags that match only will run the job.
Any branches/tags that match ignore will not run the job.
If neither only nor ignore are specified then the job is skipped for all branches/tags.
If both only and ignore are specified the only is considered before ignore.

If both branch and tag filtering is configured and a push to your code includes both branch and tag information, the branch filters take precedence. In this scenario, if there are no branch filters configured, tag ignore filters are used, if they exist.

Branch-level job execution

The following example has one workflow that is configured to run different sets of jobs for different branches:

The test_dev job is run on the dev branch and any branch that begins user-
The test_stage job is run on the stage branch
The test_pre-prod job is run on any branch starting pre-prod including any suffix added to the branch name using a hyphen.

Workflows ignore branches keys used in the jobs declaration. If you use the deprecated job-level branches key, replace them with workflow filters.

This example shows how to provide strings and lists of strings when configuring workflow filters.

workflows:
  dev_stage_pre-prod:
    jobs:
      - test_dev:
          filters:  # using regex filters requires the entire branch to match
            branches:
              only:  # only branches matching the below regex filters will run
                - dev
                - /user-.*/
      - test_stage:
          filters:
            branches:
              only: stage
      - test_pre-prod:
          filters:
            branches:
              only: /pre-prod(?:-.+)?$/

This setup can be illustrated as follows:

For more information on regular expressions, see the Using Regular Expressions to Filter Tags And Branches section below.

For a full example of workflows, see the configuration file for the Sample Sequential Workflow With Branching project.

Executing workflows for a git tag

Webhook payloads are capped at 25 MB and for some events a maximum of 3 tags. If you push several tags at once, CircleCI may not receive them all.

CircleCI does not run workflows for tags unless you explicitly specify tag filters using regular expressinos. Both lightweight and annotated tags are supported.

If you have configured a job to run on a git tag you must also specify tag filters for any dependent jobs. Use regular expressions to specify tag filters for a job.

In the example below, two workflows are defined:

untagged-build runs the build job for all branches.
tagged-build runs build for all branches and all tags starting with v.

workflows:
  untagged-build:
    jobs:
      - build
  tagged-build:
    jobs:
      - build:
          filters:
            tags:
              only: /^v.*/

In the example below, two jobs are configured within the build-deploy workflow:

The build job runs for all branches and all tags.
The deploy job runs for all branches and only for tags starting with 'v'.

workflows:
  build-deploy:
    jobs:
      - build:
          filters:  # required since `deploy` has tag filters AND requires `build`
            tags:
              only: /.*/
      - deploy:
          requires:
            - build
          filters:
            tags:
              only: /^v.*/

In the example below, three jobs are configured for the build-test-deploy workflow:

The build job runs for all branches and only tags starting with 'config-test'.
The test job runs once the build job completes for all branches and only tags starting with 'config-test'.
The deploy job runs once the test job completes for no branches and only tags starting with 'config-test'.

workflows:
  build-test-deploy:
    jobs:
      - build:
          filters:  # required since `test` has tag filters AND requires `build`
            tags:
              only: /^config-test.*/
      - test:
          requires:
            - build
          filters:  # required since `deploy` has tag filters AND requires `test`
            tags:
              only: /^config-test.*/
      - deploy:
          requires:
            - test
          filters:
            tags:
              only: /^config-test.*/
            branches:
              ignore: /.*/

In the example below, two jobs are defined (test and deploy) and three workflows use those jobs:

The build workflow runs for all branches except main and is not run on tags.
The staging workflow will only run on the main branch and is not run on tags.
The production workflow runs for no branches and only for tags starting with v..

workflows:
  build: # This workflow will run on all branches except 'main' and will not run on tags
    jobs:
      - test:
          filters:
            branches:
              ignore: main
  staging: # This workflow will only run on 'main' and will not run on tags
    jobs:
      - test:
          filters: &filters-staging # this yaml anchor is setting these values to "filters-staging"
            branches:
              only: main
      - deploy:
          requires:
            - test
          filters:
            <<: *filters-staging # this is calling the previously set yaml anchor
  production: # This workflow will only run on tags (specifically starting with 'v.') and will not run on branches
    jobs:
      - test:
          filters: &filters-production # this yaml anchor is setting these values to "filters-production"
            branches:
              ignore: /.*/
            tags:
              only: /^v.*/
      - deploy:
          requires:
            - test
          filters:
            <<: *filters-production # this is calling the previously set yaml anchor

Using regular expressions to filter tags and branches

CircleCI branch and tag filters support the Java variant of regex pattern matching. When writing filters, CircleCI matches exact regular expressions.

For example, only: /^config-test/ only matches the config-test tag. To match all tags starting with config-test, use only: /^config-test.*/ instead.

Using tags for semantic versioning is a common use case. To match patch versions 3-7 of a 2.1 release, you can write /^version-2\.1\.[3-7]/.

For full details on pattern-matching rules, see the java.util.regex documentation.

Each workflow has an associated workspace for transferring files to downstream jobs as a workflow progresses.

Configuration options are available to:

persist files to the workspace

- persist_to_workspace:
    root: /tmp/workspace
    paths:
      - target/application.jar
      - build/*

attach a workflow’s workspace to a container.
```
- attach_workspace:
    at: /tmp/workspace
```

For further information on workspaces and their configuration see the Using Workspaces to Share Data Between Jobs doc.

Rerunning a workflow’s failed jobs

Workflows help to speed up your ability to respond to failures. One way to do this is to only rerun failed jobs rather than a whole workflow. To rerun only a workflow’s failed jobs, follow these steps:

In the CircleCI web app select your organization.
Select Pipelines in the sidebar.
Use the filters to find your project and pipeline.
Find the row in the pipeline view for the workflow you would like to rerun from failed and select the Rerun from failed icon. This option is also available in the workflow view using the rerun dropdown menu, which you can access by clicking on the workflow name or badge.

If you rerun a workflow containing a job that was previously re-run with SSH, the new workflow runs with SSH enabled for that job, even after SSH capability is disabled at the project level.

Workflow states

Workflows may have one of the following states:

State	Description	Terminal state
RUNNING	Workflow is in progress	No
NOT RUN	Workflow never started	Yes
CANCELED	Workflow canceled before it finished	Yes
FAILING	A job in the workflow failed, but others are still running or yet to be approved	No
FAILED	One or more jobs in the workflow failed	Yes
SUCCESS	All jobs in the workflow completed successfully	Yes
NEEDS APPROVAL (UI) / ON HOLD	A job in the workflow is waiting for approval	No
ERROR	We experienced an internal error starting a job in the workflow	Yes
UNAUTHORIZED	One or more of the jobs terminated with a `unauthorized` job status. The user who triggered the pipeline or approved an approval job does not have access to a required restricted context.	Yes

After 90 days non-terminal workflows are automatically by CircleCI.

Troubleshooting

This section describes common problems and solutions for workflows.

Workflow and subsequent jobs do not trigger

If you do not see your workflows running, check for configuration errors that may be preventing the workflow from starting. Navigate to your project’s pipelines and find your workflow name to locate the failure.

Rerunning workflows fails

Failures may happen before a workflow runs during pipeline processing. Re-running the in this case workflow will fail. Push a change to the project repository or use the trigger pipeline option to rerun the pipeline.

You cannot rerun jobs and workflows that are >= 90 days.

Workflows waiting for status in GitHub

If you have workflows configured on a protected branch and the status check never completes, check the ci/circleci status key. ci/circleci is related to a deprecated check and should be and deselected.

Go to Settings Branches in GitHub and select Edit on the protected branch to deselect the settings, for example: https://github.com/your-org/project/settings/branches.

Workflow orchestration

On This Page

Overview

Workflows configuration examples

Concurrent job execution

Sequential job execution

Fan-out/fan-in workflow

Hold a workflow for a manual approval

Configure an approval job

Approve a job

Scheduling a workflow

Build every night

Specifying a valid schedule

Use conditional logic in workflows

Using filters in your workflows

Branch-level job execution

Executing workflows for a git tag

Using regular expressions to filter tags and branches

Rerunning a workflow’s failed jobs

Workflow states

Troubleshooting

Workflow and subsequent jobs do not trigger

Rerunning workflows fails

Workflows waiting for status in GitHub

See also

Suggest an edit to this page

Still need help?

Workflow orchestration

On This Page

Overview

Workflows configuration examples

Concurrent job execution

Sequential job execution

Fan-out/fan-in workflow

Hold a workflow for a manual approval

Configure an approval job

Approve a job

Scheduling a workflow

Build every night

Specifying a valid schedule

Using contexts to share and secure environment variables

Use conditional logic in workflows

Using filters in your workflows

Branch-level job execution

Executing workflows for a git tag

Using regular expressions to filter tags and branches

Using workspaces to share data between jobs

Rerunning a workflow’s failed jobs

Workflow states

Troubleshooting

Workflow and subsequent jobs do not trigger

Rerunning workflows fails

Workflows waiting for status in GitHub

See also

Suggest an edit to this page

Still need help?